EGR 352
Chapter 4 & 8 problems
2. Push on the rear of the motor, to enact the line release, and feed the line through the eyes of the pole, the spring bobber, the end connection, and finally the stop mechanism in that order.
3. Tie on the desired hook or lure to the end of the line and add a small split shot sinker to the line at the desired level that you wish to stop the line.
4. Feed the line down through the hole to the desired depth that you wish to fish.
5. After reaching the desired fishing depth, press the red button on the top of the battery box to disconnect the line release of the reel.
6. Place the pole in the line holder, sit back and wait for the fish to bite.
7. To retrieve the line at anytime, to check your bait, simply press the red button on the battery box.
8. At the end of the fishing day disconnect the battery connections.
| Qty. | Material |
| 4
1 1 1 1 1 1 1 1 1 1 2 2 ft. 12 4 1 1 |
Stainless steel pipe clamp
12 Volt lantern battery 28" Ice pole Zebco 33 fishing reel Wire spring Spring bobber Momentary pushbutton switch Steel handle 4-7/8" Plywood 4' x 2' x 3/4" 12 Volt DC motor PVC pipe coupler 3/4" Stainless steel hinge 1/8" x 1-1/2" Steel wire Stainless steel wood screws #6 x 1-1/2" Stainless steel wood screws #6 x 3/4" Screw eye bolt 1/8" diameter Snap latch |