Version 1.0, August 31, 2001, Copyright, Hugh Jack 1993-2001
There are three objectives for this course. First it is important that you master the content of this course as this is the foundation for engineering analysis as well as almost all of the mechanical engineering courses that follow. Second, it is important that you master the engineering approach to problem solving. Finally, you will be expected to develop critical thinking skills by applying concepts learned in class to mechanical systems.
Assistant Professor, School of Engineering
Office: Pad 146 OR Suite 618, Eberhard Center
www: http://claymore.engineer.gvsu.edu
SEC A: M, T, W, F, 8-9am, PAD 168
SEC B: M, W, 10-11am, F, 9-11am, MAK 2341
Engineering Mechanics; Statics (with Mathcad supplement), by R. W. Soutas-Little and D.J. Inman, Prentice Hall
Mechanics of Materials, by J.M. Gere and S.P. Timoshenko, PWS Publishing
EGR 209/210 -Statics and Solid Mechanics Lecture Notes, by H. Jack
EGR 209 students must have taken Physics 230 and Math 202
There will be a final exam. There will also be two midterm tests, each one hour in duration. All students will be expected to write tests at the scheduled time, make-up tests will be given only in the most extreme circumstances at the discretion of the instructor.
Within the first few lectures a project topic will be chosen. The selected mechanical structure will be analyzed over the term as relevant material is covered. Segments of the report will be judged acceptable (100%)/not-acceptable(0%). In the event a portion of the work is not acceptable, there will be a single chance to correct it. As with the work of a Professional Engineer, at any time your work may be reviewed, and the grade changed. The project will be kept up to date by adding to relevant web pages. The work will be done in groups of three students.
You will not be able to learn this material if you do not do problems. To encourage you to do homework in a professional manner, random samples of the assignments will be collected and graded. This homework may be collected as soon as the next class after introduction, and when collected it is due immediately. All homework solutions should be logical, concise, clear, and readable.In general the following rules should be observed,
The grade for this course will be determined as follows:
08/30 1 Course overview - introduction to statics
3 Vector addition and subtraction
4 Particle equilibrium and force triangles
09/08 5 Projected forces with unit vectors and dot products
09/13 7 3D particle equilibrium
8 Equilibrium and free body diagrams
09/20 11 Analysis of stress in rigid bodies
12 Oblique and generalized stress
10/04 16 Moments using cross products
10/11 20 Introduction to mass properties
21 Centroids using integration
22 Centroids using composite sections
10/18 24 Moments and Forces on 3D objects
25 Equilibrium of Rigid Bodies
27 Loading and Factor of Safety
29 Introduction to Truss Analysis and Project
11/01 30 Method of members for machine frames
33 Review of Trusses and Frames
11/08 34 Internal forces in members and beams
37 Normal, shear and bearing stress
FINAL EXAMINATION (Section A - Mon., 13, Dec., 1999, 8-10am)
(Section B - Tues., 14, Dec., 1999, 12-2pm)
There are three objectives for this course. First it is important that you master the content of this course as this is the foundation for engineering analysis as well as almost all of the mechanical engineering courses that follow. Second, it is important that you master the engineering approach to problem solving. Finally, you will be expected to develop critical thinking skills by applying concepts learned in class the mechanical systems.
Assistant Professor, School of Engineering
Office: Pad 146 OR Suite 618, Eberhard Center
www: http://claymore.engineer.gvsu.edu
M, W, 2-3pm, F, 2-4pm, PAD 168
Monday, Wednesday, Friday 11-12
Mechanics of Materials, by J.M. Gere and S.P. Timoshenko, PWS Publishing
EGR 209/210 -Statics and Solid Mechanics Lecture Notes, by H. Jack
EGR 210 students they need to have taken a basic statics course
There will be a final exam. All students will be expected to write tests at the scheduled time, make-up tests will be given only in the most extreme circumstances at the discretion of the instructor.
You will not be able to learn this material if you do not do problems. To encourage you to do homework in a professional manner, random samples of the assignments will be collected and graded. This homework may be collected as soon as the next class after introduction, and when collected it is due immediately. All homework solutions should be logical, concise, clear, and readable.In general the following rules should be observed,
The objective of this project is to build a beam with the highest failure load to weight ratio using approved materials. A list of approved materials and geometry constraints will be provided. All beams will be tested and a report will be required. The report will detail how the student applied concepts learned in the class to the project.
The grade for this course will be determined as follows:
09/09 5 Axial and shear stress
6 Analysis of stress in rigid bodies
09/14 7 Oblique and generalized stress
12 Centroids and parallel axis theorem review
14 Loading and Factor if safety
18 Internal forces in beams review
10/05 19 Moments of Inertia Review